Interpersonal deception theory Essay

The interpersonal deception theory’s presence throughout Martin Scorsese’s film, The Departed, is made abundantly clear through the interactions between the characters. Two of the main characters, Agent Sullivan and William, both lie in order to do their jobs, and to just survive. These characters exhibit the three dominant deception theories – falsification, concealment, and equivocation, as well as utilizing eye contact, either purposely or not. The interpersonal deception theory attempts to explain the manner in which two people who are engaged in face-to-face communication deal with deception. It is possible to detect deception from verbal and nonverbal cues. There are three dominant deception theories – falsification, concealment, and equivocation. Falsification is when one individual, the â€Å"sender†, blatantly lies to another individual, the â€Å"receiver. † Concealment is when the sender omits certain facts; this results in deception. Equivocation is when the sender skirts the issues by changing the subject (Hearn 2006). In Martin Scorsese’s film The Departed, William, the undercover officer working with Frank Costello, and Agent Sullivan, the detective who is helping Frank Costello, both exhibit dominant deception theories. Both lie throughout the entire film; William is a good guy pretending to be bad, while Agent Sullivan is a bad guy pretending to be good. Both are fairly good at lying, however, there are small, somewhat tell-tale signs that they are being deceptive. Agent Sullivan is a detective with the Massachusetts State Police. When he was a boy, a local criminal, Frank Costello, helped him out, and the two had been friends ever since. When Sullivan became a detective on a case where the police were trying to capture Costello, Sullivan did everything he could to help Costello. Because of his two-faced nature, he had to lie to his girlfriend, Madolyn, and the men he worked with, including his boss. Agent Sullivan worked his deception on those around him in two obvious ways – concealment and equivocation. The first example is of equivocation. About half way through the film, Sullivan got a phone call from Costello, and Madolyn answered the phone. When Sullivan got off the phone, Madolyn asked him who had called him. Sullivan told her that it was his boss. She knew he was lying to her, so he skirted the issue by saying that there are things about his job that he could not tell her, things that she did not even want to know. He even tried to make a joke about her questions interfering with an ongoing investigation. He successfully got her mind off of the actual issue at hand, the issue of the mysterious caller. The example of concealment is demonstrated throughout the film in regards to Agent Sullivan. Sullivan spends the entire film trying not to be found out as the man Costello has in the police department. When things start to really unravel, Sullivan is assigned to find the leak in the department, and he actually takes on the task. From here on out, Sullivan works hard to continue to conceal his true identity. William was working for the Massachusetts State Police as an undercover cop. He did not successfully complete the training at the Police Academy, but he wanted to be a cop. No one knew he was working for the police department except for two high-ranking officers. William became a trusted friend of Frank Costello while investigating him. This gave William the edge he needed to capture Costello, but deceiving Costello could have proved to be deadly. William worked his deception on Costello in two ways – falsification and concealment. In a scene where Costello wanted to talk to William about a â€Å"rat† in the operation, William flat-out lied to him, telling Costello that he was not the rat. William knew that Costello suspected him of being the rat, but William kept denying it. Costello began to believe him. William successfully lied his way out of a potentially deadly situation. William also used the trick of concealment to his advantage. He, first and foremost, concealed his identity, not only from Costello and his gang, but also from other officers in the police department. No one in the police department knew that he was working undercover. Because he did not graduate from the Police Academy, William was not a real police officer. Because of this, he went virtually undetected. William’s concealment of his true identity was successful, until Costello wanted his real name, social security number, and bank account numbers. It was then that William knew he had to find a way out. From here on out, things began to fall apart. Both Agent Sullivan’s and William’s deception could have been detected. Most individuals believe that they can tell when a person is lying to them. They can detect deception by listening and watching the sender. Signs such as eye contact/rapid eye movement, body rigidity, and fidgeting can be tell-tale signs of when an individual is trying to deceive another individual. Eye contact is held as the number one indicator of truth or deception. Most believe that if an individual holds strong eye contact, then that person is being truthful. On the other hand, if one’s eyes move rapidly, or one cannot look another in the eye while talking to them, it is an indication of deception. Law enforcement interviewers and interrogators believe that when a person is not being truthful, they will break eye contact and either look to the right or to the left. This belief, however, is not substantiated (Walters 2000). Although proven an unreliable means of detecting deception, this does not stop Scorsese from implementing this strategy when it comes to Agent Sullivan’s behavior. Agent Sullivan’s behavior, if paid attention to, would have alerted anyone to his deception. For example, Sullivan never made complete eye contact while lying. He does make good eye contact when he says that Costello has a man in the police department, because that information is true. However, when he says that he is working on finding out who it is, he looks briefly at the floor. Sullivan breaks eye contact, an indication that he is lying. In actuality, Sullivan himself is the man Costello has in the police department, so Sullivan has no intention of finding out who the rat is. Another example of Agent Sullivan’s odd behavior is at the sting. Sullivan calls Costello to inform him that he is being watched by the police. Later, Sullivan finds out that the FBI is present and is monitoring cellular phone activity. Sullivan begins to sneak nervous glances around the room, looking to see if anyone has detected his involvement with Costello. In the scene where William meets Costello for a discussion on who the â€Å"rat† is, William makes deliberate, strong eye contact. Unlike Agent Sullivan, when William lies to Costello, William looks him straight in the eye and does not waiver. William is nervous about meeting with Costello, but he carries himself as though he is in control of the situation. Although William was nervous, he does not back down from Costello. This forces Costello to back down and to take William’s word that he is not the rat at face value. It is generally believed that when someone breaks eye contact with the person they are talking to, they could be lying. However, when someone makes deliberate eye contact, that could mean that they are trying to conceal the fact that they are indeed lying. Deliberate eye contact also means that the person maintaining strong eye contact is trying to maintain dominance or control over the person he is speaking with. This is done is such a way that the receiver would not even think about questioning the accuracy of the sender’s words (Walters 2000). This is how William wins over Costello. The term â€Å"leakage† is used to refer to any behavior outside of a deceiver’s conscious controls that could signal dishonesty. These signals could include the formerly mentioned body rigidity and fidgeting (Schneider 2007). For example, when Agent Sullivan is at the sting, after he found out that the FBI were monitoring cellular phone activity, he sits very still, only moving his head to glance around the room. His body seems to become very rigid, perched uncomfortably on a table. He also seems to be fidgeting inside his coat pocket. In actuality, however, he is sending a text message to Costello that says, â€Å"no phones. † Sullivan could have â€Å"leaked† his involvement with Costello if someone had been paying attention. The characters of Agent Sullivan and William exhibit falsification, concealment, and equivocation. The use of eye contact, both deliberate and not, make the characters more human. All of the signs of dishonesty that these two characters exhibited made the viewer believe that those characters were real. Both characters’ deceptions could have been seen through, like most people’s deceptions, but they were not detected. They carried their burdens well, working their hardest to not only do their jobs, but to survive.

Lightweight Aggregate Concrete (LAC)

Chapter 1: Introduction 1.1: Foreword Aggregate and cement concrete drama a critical function in the civil technology where the building of constructions both for domestic and commercial intent is dependent upon the quality and scientific features of the concrete used as argued by Leif Berntsson Satish Chandra ( 2002 ) [ 1 ] . This is apparent from the fact that concrete is used in many applications apart from structural applications including insularity, make fulling etc†¦ In this study a critical analysis on the lightweight sum concrete ( LAC ) is presented to the reader. The research will supply a comprehensive penetration on the scientific facets environing LAC and the demand for utilizing LAC in structural applications. 1.2: Purpose and Aims The purpose of this study is to show a critical analysis on the Lightweight Aggregate Concrete ( LAC ) and research on its structural applications and farther developments. The above purpose is achieved by encompassing the study on the undermentioned aimsTo carry on a comprehensive overview on the Lightweight Aggregate Concrete ( LAC ) by supplying the history, definitions and economic factors environing the applications and usage of LAC in civil constructions.To supply a critical overview on the production of cement and its belongingss in the visible radiation of LAC and its application in civil constructions.To show a scientific analysis on the belongingss of LAC utilizing different composing stuffs including both the mechanical and chemical belongingss.To look into on the ordinances refering to LAC and their effects on a specific composing of LAC in a given geographical part.To look into on the LAC production and usage in Greece.1.3: Research Scope The presence of concrete in civil technology is thorough in nature and therefore the research range is limited to the composing of the LAC and its application in civil construction applications. The cardinal facets of the LAC and its industry in Greece is besides included in the range of the research although a planetary research on the LAC industry and ordinances refering to LAC is out of range of this undertaking. The research range besides includes the probe of the general ordinances adhered in the Europe including the ACI-318 and design considerations in the visible radiation of Seismic Design. 1.4: Research methodological analysis The nature of the research is dependent on the analysis and findings environing the LAC which is used in civil constructions. Since constructing a civil construction is non portion of the undertaking due to be and resource restraints, the research methodological analysis is strictly dependent on qualitative analysis utilizing secondary research informations. The qualitative attack to research in instances of the technology analysis is advised as a dependable attack as the findings from the research on the secondary resources are already published therefore supplying a validated beginning of information for analysis. This is farther justified by John W. Creswell ( 2002 ) [ 2 ] . Hence the research methodological analysis in this study is qualitative research utilizing published resources including diaries, text books and scientific documents. The Internet is used as the chief hunt infinite for roll uping information to execute the qualitative analysis. 1.5: Chapter Overview Chapter 1: Introduction This is the current chapter where the reader is provided with a brief debut on the subject, research purpose and aims, range and methodological analysis. The chapter sets the phase for the overall research presented in the study. Chapter 2: Literature Reappraisal In this chapter a historic overview on the concrete and the usage of Lightweight Aggregate Concrete ( LAC ) is presented to the reader. This is so followed by the definition of the LAC and its application in the civil structural applications from a historic position. The chapter is concluded with an overview on the economic factors and benefits realised through the usage of the LAC in the civil construction applications with illustrations. The economic overview besides throws visible radiation on the cardinal facets of LAC that benefit the overall concrete composing in structural applications every bit good as supply a elaborate reappraisal of the assorted LAC composings used in the yesteryear during the initial phases of LAC’s usage in the building industry. Chapter 3: Concrete Production This chapter presents a elaborate overview on the modern concrete production techniques and the development of the production techniques over the old ages. The two popular techniques used in the production viz. the rotary kiln and the sintering procedure with penetration on the fluctuations is presented to the reader in this chapter. Furthermore, the lightweight sum production and the cardinal production methods used in the commercial applications including the advantages associated are presented to the reader. Chapter 4: LAC – Properties, Regulations and composing analysis based on geographics. This chapter presents a critical analysis on the belongingss of LAC and the assorted combination of lightweight sum that is used in different classs of the building. The research throws visible radiation on the assorted composings of lightweight sum and their distinguishable characteristics that help accomplish the coveted benefits in a structural application. The chapter so presents a critical overview on the ordinances refering to the LAC followed by the composing analysis based on the stuffs that are available locally to a given geographical location. The chosen geographics for this research is Greece. Chapter 5: Decision This chapter reviews the aims of the research followed by supplying the decision to the study. Chapter 2: Literature Reappraisal 2.1: Historical overview Concrete, typically a mixture of sand, crushed rock and cement day of the months back to ancient history when ruddy calcium hydroxide was used as a cementing constituent in doing concrete ( Leif Berntsson Satish Chandra, 2002 ) . This makes it clear that the current mixtures of concrete have evolved over the historic periods to provide assorted technology demands with the developments in scientific discipline and the inventions in technology as argued by Leif Berntsson Satish Chandra ( 2002 ) . A classical illustration for the development of concrete since the ancient history is the usage of concrete by Romans in 300 BC when they found that blending a pink sand-like stuff which was volcanic ash they obtained from Pozzuoli with their normal lime-based concretes resulted in a far stronger stuff. The history behind the usage of sum to do concrete mix day of the months back to every bit early as the early the Roman period when the Romans used advanced methods in fixing concrete mixes with different sum stuffs to accommodate the structural demands and strength. The classical illustrations for the above statement include the usage of lightweight sums as in the roof of the Pantheon, and embedded support in the signifier of bronze bars as argued by Leif Berntsson Satish Chandra ( 2002 ) . The engineering in concrete utilizing different sums every bit good as accounting for thermic and other physical qualities of re-enforcing stuffs to do concrete mixes that provide the coveted strength is apparent throughout history although the industrial revolution and the addition in the technology and the function of steel in the 20Thursdaycentury have increased the invention every bit good as developments around the engineering of doing the right concrete mix. Concrete is non merely a critical component in the civil structural applications but besides a cardinal component in many other applications environing the building concern doing it one of the of import and most sought after merchandise in the technology concern itself as argued by Fu-Tung Cheng and Eric Olsen ( 2002 ) [ 3 ] . This is of course because of the fact that concrete is non merely a constituent in the building of civil constructions but besides a design ingredient in make up one's minding upon the strength, truss and other physical elements that govern the stableness of a given edifice. This is besides justified in the statements of Leif Berntsson Satish Chandra ( 2002 ) . The definition of cement in technology footings refers to pulverize stuffs which develop strong adhesive qualities when combined with H2O. This makes it clear that the cementing action of volcanic ash that was used to do concrete by the Romans autumn under the cement. It is farther apparent that concrete is referred to as a composite edifice stuff made from the combination of sum and cement binder. From the above it is clear that the developments in the quality of cement and the innovation of Portland cement, gypsum plaster, etc†¦ have a direct influence on the development of the concrete engineering although the aggregative constituent of the concrete composing plays an every bit of import function in assorted mixes of concrete that serve a coveted intent as argued by Leif Berntsson Satish Chandra ( 2002 ) . Another component of greater significance to the development of concrete engineering in the recent old ages every bit early as the 1900s is the development of concrete boats during the 2nd universe war where the lightweight sum concrete played a critical function in the design and building of the ships itself as argued by Glenn A. Black ( 2004 ) [ 4 ] . It is besides interesting to observe that the importance of concrete has increased with the demand for refined and purpose specific concrete mixes where the function of concrete has been non merely to supply the structural support but besides the coveted strength at the needed physical conditions that is set in the given geographical location as argued by Glenn A. Black ( 2002 ) . The growing of the expanded clay and shale industry since the morning of the 20Thursdaycentury and the developments during the Second World War when the lightweight sum concrete utilizing clay and shale was used to build the war ships marked the accelerated growing of the usage of lightweight aggregative concrete as argued by Glenn A. Black ( 2004 ) . 2.2: Definition of lightweight sum In order to specify the lightweight sum – the subject under research in this thesis, it is indispensable to show the basicss environing the lightweight sum. Hence this subdivision foremost presents a brief research on sum, its function in building as portion of the concrete mix and so travel towards the nucleus subject ( i.e. ) the definition of lightweight sum. Aggregate is the footings used to jointly mention to the ingredients in doing a concrete mix that gives strength and texture to the overall concrete composing made of sand, cement and sum as argued by Glenn A. Black ( 2004 ) . Aggregate is the composite stuff of the concrete that is aimed to defy compressive emphasis doing it clear that the size, strength and weight of the aggregative stuffs are critical constituents for the overall efficiency of the concrete to pull off the compressive emphasis as argued by Glenn A. Black ( 2004 ) . The modern twenty-four hours concrete utilizations Portland cement as the cementing component and the sum that is held together by the cement and H2O to plan concrete for different grades of strengths, lastingness, heat & A ; sound insularity, and H2O stringency as argued by Glenn A. Black ( 2004 ) . This makes it clear that the sum is the critical constituent of the concrete that attributes to observe merely the strength and quality of the concrete but besides dictates the nature of the applications and the extent to which invention in technology can be taken to. The cardinal physical quality of the sum is the compressive strength that it can back up for a given composing. The lightweight sums that are researched in this study typically attribute to up to 80 lbs per square inch which is used chiefly applications that demand lightweight concrete by virtuousness of the placement or for the support, insularity etc. specific gravitation is another critical component in depicting the quality of sum as the specific gravitation off the substance is straight relative to its emphasis and squeezability factors as argued by Glenn A. Black ( 2004 ) . A typical combination and most popular in the building industry for the sum is the crushed rock and sand mix at different sizes and squeezability that are used in high demand building structural applications as argued by Glenn A. Black. Hence sum in concrete is defined as the constituent of concrete that attributes to the strength, lastingness, squeezability and insularity properties to back up the coveted building application. Lightweight Aggregate Glenn A. Black ( 2004 ) says â€Å"The term â€Å" Lightweight Aggregate † describes a scope of particular usage sums that have an evident specific gravitation well below normal sand and crushed rock which were at one clip used in about all concrete† . From the above it is clear that the lightweight sum is one of the critical elements that makes concrete flexible and various to do the overall structural design and specifications as to run into the building demands as argued by Leif Berntsson Satish Chandra ( 2002 ) . It is besides interesting to observe that the lightweight sum in the concrete that is made utilizing light weight stuffs besides provide an appreciable degree of squeezability every bit good as possess strength that can be defined based on the composing therefore doing it a versatile and cost effectual procedure in the production procedure itself. The scope of lightweight sum is extended in nature from highly light stuffs used for insularity and non-structural concrete all the manner to expanded clays and shales used for structural concrete. This makes it clear that the lightweight sum in the concrete is chiefly aimed to accomplish high degree of physical stableness and squeezability through efficaciously using the physical qualities of the aggregative stuffs. This is farther justified in the statements of Leif Berntsson Satish Chandra ( 2002 ) who argues that the lightweight sum in the concrete is a major measure towards invention in the field of technology itself. The strength and the air trapped in each single atom of the constituents of the aggregative stuffs are reciprocally relative to each other therefore doing it clear that in order to derive lightweight aggregate the sum of air trapped in the single atoms must be high therefore doing it clear that the strength of the concrete therefore obtained is low. The above relationship stated provides the counsel to guarantee the balance between the air trapped and the strength required in the concrete mix therefore doing the overall lightweight sum concrete customisable to run into the structural demands of the application on manus. Lightweight Aggregate Concrete Spectrum The concrete spectrum ensuing from the usage of the lightweight sum is highly diverse in nature runing from really lightweight sum concrete up to high strength sums dedicated for specific bespoke applications as argued by Glenn A. Black ( 2004 ) . The ace lightweights scope of aggregative concrete that are derived from Vermiculite and Perlite are the capable of presenting weights every bit low as 15 to 20 lbs per three-dimensional pes therefore doing it clear the application of lightweight sums in the technology concern provides a diverse scope of applications for concrete. The natural sums, Pumice and Scoria for illustration can be used to do concrete deliberation at approximately 25 to 30 lbs per three-dimensional pes and extended every bit high as 65 lbs per three-dimensional pes as argued by Glenn A. Black ( 2004 ) . Furthermore, the usage of coal clinkers and expanded shale, clay and slate sums produced utilizing rotary kiln method can present weights in a varying scope from 75 to 120 lbs per three-dimensional pes. Another popular production method for this scope of sums includes the sintering where the weights are delivered typically runing from 90 to 120 lbs per three-dimensional pes. The high terminal applications of aggregative concrete include the production of sums capable of presenting weights up to 150 lbs per three-dimensional pes utilizing the air-cooled scoria sums and the hard-rock sums such as sand and crushed rock and crushed rock, which produce conventional concretes as mentioned by Glenn A. Black ( 2004 ) . From the above it is clear that the sums that lie in the lower terminal of the weight that have lower compressive strength are used chiefly for insularity intents whilst those in the in-between spectrum are used for insularity and filling. The high terminal of the lightweight sum concrete spectrum are used in a broad scope of structural applications that demand high compressive strengths every bit good as efficient direction of weight as argued by Glenn A. Black. The concrete spectrum for the lightweight sum concrete is presented in the figure below Fig 1: Lightweight Aggregate Concrete Spectrum ( Beginning: Glenn A. Black ( 2004 ) ,Lightweight Concrete history, Applications and Economics,Indiana University ) 2.3: Economicss environing lightweight Aggregate Concrete The cardinal facets of Lightweight Aggregate Concrete that attribute to the economical and structural benefits derived through the structural applications utilizing LAC include the undermentioned 2.3.1:Fire opposition– Resistance to fire is one of the critical elements that is expected in concrete to guarantee that the fire opposition and the structural stableness of the civil construction is maintained through the usage of aggregative concrete as argued by John P. Ries and Thomas A. Holm ( 2006 ) [ 5 ] . The fire opposition of lightweight sum is higher compared to the typical concrete sum chiefly because of the fact that the aggregative stuffs composing the lightweight sum have lower thermic conduction, lower coefficient of thermic enlargement as argued by John P. Ries and Thomas A. Holm ( 2006 ) . The fact that the aggregative stuffs possess built-in fire resistant belongingss is the cardinal component that is emphasised and strengthened in instance of the lightweight aggregates where the aforesaid heat opposition belongingss help accomplish higher fire opposition. It is besides interesting to observe that the built-in fire stableness of sum is high and in instance o f the lightweight sum it is at a heat of over 2000 grades Fahrenheit. As it is stated in the â€Å"ACI 216 â€Å" Standard Method for Determining fire Resistance of Concrete and Masonry Construction Assemblies † , when slab thickness is determined by fire opposition and non by structural standards ( Goists, waffle slabs e.g. ) , the superior public presentation of lightweight concrete, will cut down the thickness of slabs ensuing in significantly lower concrete volumes† , ( John P. Ries and Thomas A. Holm, 2006 ) . From the above it is clear that the fire opposition belongingss of the lightweight sum straight contributes to the overall structural stableness and the decrease in the volume occupied by the concrete in the structural applications. This justifies the various nature of the lightweight sum therefore enabling it to be used in advanced structural applications as argued by John P. Ries and Thomas A. Holm ( 2006 ) . 2.3.2: Service Life of the Structure– The service life of the construction is another critical component that is used as step of economic usage in instance of measuring the concrete and the aggregative efficiency against the capital invested as argued by John P. Ries and Thomas A. Holm ( 2006 ) . Glenn A. Black ( 2004 ) further provinces that the lastingness of lightweight sum is high and the life of the constructions constructed utilizing lightweight sum prove to hold higher life lastingness. The historical grounds to warrant the aforesaid include popular constructions likeThe Port of Cosa –built about 273 B.C. where the builders used lightweight concrete made out of natural volcanic stuffs,The Pantheonthat was finished in 27 B.C that incorporates concrete changing in denseness from underside to exceed of the dome and the most popular Amphitheater, built in 75 to 80 A.D. where the foundations were cast as lightweight concrete utilizing crushed volcanic lava as argued b y John P. Ries and Thomas A. Holm ( 2006 ) . From the above statements it is apparent that the lastingness of the constructions designed utilizing the lightweight concrete is extended in nature. Looking into the more modern illustrations to warrant the service life of the lightweight sum used in concrete for building include the lightweight concrete ships built by the American Emergency Fleet Corporation during the First World War. The compressive strengths of the concrete used were in the scope of 5000 pounds per square inch ( 35 MPa ) obtaining a unit weight of 110 lb/ftJ ( 1760 kg/mJ ) or less utilizing the rotary kiln produced expanded shale and clay sum as identified by John P. Ries and Thomas A. Holm ( 2006 ) . The service of these lightweight concrete boats during the universe wars and their subsequent in the merchandiser ships warrant the lastingness and service life of the lightweight sum used in concrete building applications. Furthermore, the fact that the higher degree of air trapped in the atoms make the submergence efficient in instance of the marine applications makes lightweight sum as a natural pick for the Marine applications although the usage of lightweig ht concrete extends to commercial structural applications in many Bridgess across the United States of America where the structural efficiency and stableness on Bridgess that were deemed unserviceable due to hapless burden bearing capablenesss was improved through the usage of lightweight aggregative concrete as argued by John P. Ries and Thomas A. Holm ( 2006 ) . Furthermore, the critical component that attributes to the service life of the lightweight concrete is the heat opposition, opposition to environmental corrosion and its lightweight that reduces the burden on the construction doing its service life longer than the typical concrete applications. 2.3.3: Economic sustainability John P. Ries and Thomas A. Holm ( 2006 ) argue that the structural applications in the modern yearss are judged against the cost, functionality, aesthetics or a combination of these as argued by John P. Ries and Thomas A. Holm ( 2006 ) . This makes it clear that the costs associated with the building of the construction every bit good as the running costs associated with care, infinite and fix are the critical elements that attribute to the pick of a given concrete mix over another. The lightweight sum that is used in the LAC is higher in costs compared to the typical concrete mix as argued by John P. Ries and Thomas A. Holm ( 2006 ) . This is of course because of the demand to bring forth the concrete mix utilizing stuffs of alone physical belongingss and the extent of research and development involved with the overall design of the building application. Alongside, the cost is treated as the cardinal component in instance of commercial execution of building applications preponderant ly because of the fact that the step on the returns in footings of return on investing is attributable when compared against the costs associated with the building of the construction. John P. Ries and Thomas A. Holm ( 2006 ) say that although the capital involved with the building of lightweight constructions is high, the fact that the low care costs and costs associated with other back uping constructions during the buildings like the decrease in steel, girders and besides the decrease in the slab thickness will equilibrate the costs with the production of the LAC concrete mix itself. This farther justifies that the economic sustainability where the return on the investing and the optimal pick for building is accomplishable utilizing lightweight sum as argued by John P. Ries and Thomas A. Holm ( 2006 ) The statements of Glenn A. Black ( 2004 ) that the lightweight sum besides has the benefit of lower degree of care and negligible fixs associated due to its lastingness features farther justify that the effectivity of the lightweight sum in accomplishing economic sustainability is high. Hence the lightweight sum is extremely recommended in the building of critical structural applications like Bridgess and commercial edifice where the burden bearing is high and the infinite is a critical component to salvage costs. 2.3.3: Energy ingestion and energy nest eggs– The Energy Performance of Buildings Directive of the European Union is a classical illustration for the justification that the composing of the concrete and the belongingss of the constituents consisting the construction of constructing commercial and domestic contribute straight to the overall energy ingestion as argued by John P. Ries and Thomas A. Holm ( 2006 ) . This is farther justified in the statements of Sarah Gaventa ( 2006 ) [ 6 ] where the writer has justified that the concrete mix and the design of the overall construction to accommodate the structural demands have a direct impact on the energy ingestion. Alongside, the heat immune belongingss of the lightweight sum and the ability to pin down higher sum of air within the atoms consisting the sum further do the lightweight sum to be able to run into the warming and chilling demands in a given construction as argued by Sarah Gaventa ( 2006 ) . It is besides interesting t o observe that the energy public presentation efficiency in the edifice particularly in the West where a major part of the energy is used for heating intents justify that the concrete mix and the aggregative composing to do the concrete mix are critical for the successful energy nest eggs in the edifices as argued by Sarah Gaventa ( 2006 ) . The lastingness, stableness and other physical belongingss including the squeezability of an aggregative stuff property to the ability of the concrete used in the edifice to retain heat therefore cut downing the ingestion of energy for interior warming intents as argued by Sarah Gaventa ( 2006 ) . It is besides a good known fact that the decrease in the concrete denseness increases the thermic opposition therefore doing it clear that the lightweight sum will increase the thermic opposition due to the lower specific gravitation of the aggregative composing that reduces the denseness of the concrete used in the building of the construction. A typical illustration is the concrete denseness of 90lb/cubic pes will hold a opposition ( R value ) of 0.26/inch whilst the R value for a denseness of 135lb/cubic pes is about 0.10/inc therefore doing it clear the energy efficiency is greatly increased through the usage of lightweight sums as argued by John P. Ries and Thomas A. Holm ( 2006 ) . Chapter 3: Concrete Production 3.1: Overview The production of concrete mix utilizing the sum is achieved through the commixture of the sum, sand and cement with right sums of H2O to bring forth the concrete mix of the necessary strength. The concrete commixture is dependent upon the quality of the sum every bit good as the cement used to accomplish the coveted denseness, strength and squeezability of the concrete for the structural application. In this chapter a critical overview on the cement production followed by the production methods for lightweight sums is presented to the reader. 3.2: Cement Production The chief ingredient for the production of cement is limestone of changing chemical composings that are freely available in the preies as argued by Sarah Gaventa ( 2006 ) . The lime rock is processed and farther chemicals are added to derive the cement of the necessary strength and squeezability. The undermentioned explains the production procedure briefly The natural limestone of changing chemical combinations is foremost collected to fix the natural mix where the limestone is assorted with minerals of minerals incorporating Ca oxide, Si oxide, aluminum oxide, ferrous oxide, and Mg oxide. This mixture is prepared to a all right mixture which forms the natural mix for a typical Portland cement. This is so blended to organize the natural blend where the natural mix is formulated to a really tight chemical preparation to derive the coveted strength from the finished green goods of the cement as argued by Sarah Gaventa ( 2006 ) . The natural blending procedure is conducted in a manner where the comparative content of each oxide in the chemical composing is kept changeless throughout the production procedure in order to guarantee that the belongingss of the concluding merchandise is non altered. It is besides argued by Sarah Gaventa ( 2006 ) really little alterations to the Ca content in the natural mix may take to big alterations in the ratio of alite to belite in the cinder, and to matching alterations in the cement ‘s strength-growth features ( Sarah Gaventa, 2006 ) . This makes it clear that the effectual control of the natural mix is critical for the production of consistent quality cement to run into the demands of the structural application. The following phase is the preparation of the cinder where the blend natural mixture is put through a complex chemical reaction procedure in a big cement kiln with temperature increasing over the length of the cylinder as argued by Sarah Gaventa ( 2006 ) . The concluding merchandise of the procedure is called cinder which is the concluding merchandise of the cement produced in the solid signifier at the coveted chemical combination. This is so put through a cement crunching procedure where the cinder that is produced is assorted with little sums of Ca sulfate to crunch the cement to the desired coarseness in order to back up the structural application. Sarah Gaventa ( 2006 ) further argues that the major constituents that decide on the strength and quality of cement include the undermentionedCinderGypsumLimestoneBlast Furnace SlagThe Blast Furnace Slag is one of the critical elements in lending to the stableness of the chemical reaction in the cement kiln as argued by Sarah Gaventa ( 2006 ) . Another interesting component with the blast furnace scoria is the fact that the effectual usage of the scoria in the cement production procedure besides allows to command the specific gravitation of the cement when assorted with aggregative and H2O to organize concrete every bit good as the ability to make the coveted strength of the cement concrete through the right combination of limestone and gypsum. The schematic of the cement production procedure is presented in the fig 2 below. Fig 2: Cement production Schematic ( Beginning: hypertext transfer protocol: //www.cimnat.com.lb/Production/Model.gif ) 3.3: Sum production The aggregative production is the following critical component in the lightweight concrete readying as the lightweight sum is one of the major elements that must be produced at a higher degree of preciseness in order to guarantee the coveted degree of strength and specific gravitation are achieved as argued by John P. Ries and Thomas A. Holm ( 2006 ) . The rotary kiln method is a traditional method of production which is popular since 1946 as argued by Glenn A. Black ( 2004 ) . The procedure of the production involves the application of heat to shale, clay and slate under controlled conditions. The conditions include the force per unit area and other features that trigger chemical reactions in order to accomplish the preferable specific gravitation and denseness of the sum constituent which is so land to the needed coarseness as argued by Glenn A. Black ( 2004 ) . The sintering method every bit good as the rotary kiln method typically use the similar base natural stuff that comprise of a extremely silicious clay or shale that exhibits a bloating characteristic which is achieve through gas-forming minerals which release gas on exposure to the desired degree of heat as argued by Glenn B. Black ( 2004 ) . It is besides interesting to observe that the readying of the sum is dependent upon the extent to which the force per unit area and the external temperature is controlled that set the temperature-based chemical reactions as argued by Glenn A. Black ( 2004 ) .

Contribution to Radio Programme “Changing Time”

Imagine your local radio station is producing a series of programmes entitled â€Å"Changing Times†, in which teenagers are asked to give their views on the changes they welcome in the world around them. You have been invited to contribute. Write out the text of the presentation you would make. There are many changes that I welcome in the world around me; but I would like to discuss four specific ones with you on air here today. The first change that I welcome into today’s world is the internet. The introduction of this will be remembered by man forever.Now we have this ability, we wonder how we ever survived without it. With the introduction of sites like Facebook, Twitter and Youtube, we are now able to catch up with friends we met 3 years ago at Irish camp, or something as simple as checking out the photos from suchabody’s 18 birthday party that we attended last night. But the abilities of the internet extend way beyond the fickle holds of 21st century social networking. Using the internet enables us to research anything we could possibly think of and more. Google it† has now become such a commonly used phrase; we have students complaining if they are not allowed to use the internet for a project – since Google â€Å"knows everything†. Moving beyond social networking, the internet allows us to not only keep in touch with friends and family in all four corners of the earth (from emailing your granny over in Blackrock, to ‘skyping’ your friend Tom who moved down under to Australia); but also to meet new people who share our interests. Foreign language students are able to make new friends online with students their age in other countries and communicate quickly and easily with them.The internet is also an excellent news source. With news broadcasters such as Sky, CNN and even closer to home with RTE news all setting up websites, we are able to catch up on anything from terrorist attacks to the latest showbi z gossip in an instant. Relating to the internet; the next change, or introduction, that I welcome into our world today is the phenomenon of portable handheld internet devices; such as laptops, iPhones and the latest â€Å"must-have† – the iPad. Such devices enable us to not only reap all the benefits of our beloved internet, but we can do this whilst window shopping on Grafton Street; on he DART into work on a Monday morning; or anywhere we please for that matter. With the younger generation branching out and becoming oh-so-much-more independent than our parents and grandparents, the technology around us is clearly changing with the times. The â€Å"portable† debate brings me on to my third change, that I think has had a huge impact on the society of today, and that is mobile phones. Excluding the likes of the iPhone and the latest android phones, which seem to be able to do almost anything you could possibly want from a phone, the simple mobile phone has been of huge benefit to the ordinary Joe Blogs on the street.For the unorganised working man, his phone can now hold his daily calendar; to remind him that he has a meeting with the boss man in 40 minutes or that it is his 14th wedding anniversary tomorrow and he needs to buy his wife a present – that’s if he remembers the date of his wedding anniversary to enter it in the phone in the first place I suppose. For the cautious one, who is yet to attempt the ‘Skype Experience’, the mobile phone is perfect for keeping in touch with everybody.With so many deals and special offers being offered by service providers, it is even relatively cheap nowadays to run a pay-as-you-go mobile phone. Another benefit of our friend the Nokia, Samsung, or whatever make it is you happen to have at the moment, is reporting crime. Robberies, fires, attacks, can all be reported to the Gardai a lot quicker that running down the road trying to find the nearest phone box. Speaking of crim e, the final change which I welcome to our society today is the issue of the smoking bans, making it an offense to smoke in public places.Personally, I welcome this change with widely spread open arms. Looking firstly at the issue of smokers’ personal health, preventing them smoking in public places, is going to impact severely on the time they have to smoke. I mean, how long are you really going to want to spend huddled up against the January rain trying to light your cigarette while all your friends have the craic inside? Cutting down this might help to encourage smokers to stop, or at least cut down on the amount they smoke daily. On top of that, preventing smoking in public places helps to cut out passive smoking.As a non-smoker, I found it highly unfair that we’d have to be opened to all the risks of passive smoking, just because that guy over there fancies a cigarette with his dessert. So overall, I think it is clear that there have been many changes in our socie ty over the past number of years, and although not all of them may have been truly welcomed, I feel that the internet; portable handheld internet devices; mobile phones and the non-smoking laws have truly benefited our society and I honestly welcome them in the world around us.

Microeconomics about Fresh Water Supply Essay

Scarcity of fresh water is emerging as the most critical resource issue which world is facing in recent years. The signs of a shrinking water supply can be seen worldwide. Many restaurants no longer provide a free glass of water to diners and cities restrict its use for private pools and gardens. The supply of fresh water is limited, but with the increase in population, the demand of water increases rapidly. We use water faster from our resources than it can be replaced. This paper will discuss the issues regarding fresh water supply in the future with the already shrinking resources and fast growing world population, pollution of major water resources, impact of climate changes and longer drought seasons etc. The major factor of increasing water usage is the faster growth of world’s population. Demand for water is also rising due to increase in economic activities, urbanization and people’s lifestyles. Moreover, increasing population is shrinking the supply of water. Despite the fact that 75 percent of the Earth’s surface is covered by water, only 2. 5 percent of it is fresh water, and three-quarters of that is locked up in the form of glaciers and ice caps in polar areas, where human reach is nearly impossible. Only 0. 3 percent of the water is surface water, found in rivers and lakes. The rest is buried deep in the ground. (Hinrichsen & Tacio, 2001) The root cause of current global water crisis, especially in the third world countries, is population and there is a serious need to meet this crisis with modern techniques of water management. In the age of population explosion, more water is required for irrigation and we need to develop a sound planning to utilize water resources. Water scarcity has become a greater concern at present as people were facing shortage of water. Because of overpopulation, mass consumption, misuse, and water pollution, the availability of drinking water per capita is inadequate and shrinking. Because of population growth – coupled with industrialization and urbanization – will result in an increasing demand for water and will have serious consequences on the environment. The connection of Fresh Water and population is much closed, increase in population, urbanization affect the quality and availability of water resources. Also, population growth enhances the demand of fresh water for agriculture use, and house hold consumption. Scares and contaminated water supply also cause health problems. The shortage of water may arises political conflicts among countries, the example is India and Pakistan, both of them shares two or more rivers the India have advantage because he uses upstream water and the left is for Pakistan’s use. But they are not satisfied with all this, and try to get more and more by agreements and table talks. Some times it seems that they both are ready to fight for water, this type of situation is dangerous for the economy of both countries. (Hinrichsen & Tacio, 2001) Water is a strategic resource in the globe and an important element in many political conflicts. Some have predicted that clean water will become the â€Å"next oil†, making Canada, with this resource in abundance, possibly the richest country in the world. The Middle East region has only 1 percent of the world’s available fresh water, which is shared among 5 percent of the world’s population. Thus, in this region, water is an important strategic resource. By 2025, it is predicted that the countries of the Arabian Peninsula will be using more than double the amount of water naturally available to them. Jordan, for example, has little water, and dams in other countries have reduced its available water sources over the years. Other dispute on water is on river Gangus between India and Bangladesh. India controls the flow to Bangladesh. The two countries have now signed an agreement to use the water of Gangus River equally to prevent further conflicts in future. (Water Politics, 2008) As shortage of water increases by time to time, many countries of the world try to prevent this shortage by making laws and strategies for efficient use of water in house holds and industrial sectors. They attempt to make water reservoirs like dams and barrages to control the flow of water down stream and to fully utilize the river water and make it sure that not a single drop of water wastes. Dams are emerged as the major step which different governments take to overcome the crisis of water. There are at least 40,000 dams that are built to date in the world. (Hinrichsen & Tacio, 2001) Among these countries, India is the one, who increasingly rely on Dams to meet its water needs. The shortage of water may arises political conflicts among countries, the example is India and Pakistan, both of them uses 2 or more than 2 rivers the India have advantage of having the upstream water of all the major rivers which flow towards Pakistan. Thus there is a high probability of emergence of any new conflict over fresh water between these two countries. There are some other countries which have very little amount of fresh water within their boundaries, so they must use alternate way to get fresh water. They must resort to the conversion of sea water into fresh water to fulfill their needs, not to mention land locked countries. The process is known as Desalination. Without this process they are not able to support there population. The technology is very high energy consuming and is very expensive; it is beyond the reach of most poor countries which facing water shortage, like some countries of Africa. (Hinrichsen & Tacio, 2001) The major use of water is in Agriculture sector, industrial sector and by house holds. With the increase in population, the usage requirements are rise proportionally. Increase in population’s living standards, increases per capita water consumption. Increasing Agricultural and Industrial usage reflects improving in living standards. Agriculture Dominates global water use, accounting for 69 percent of all water withdrawals. Industry accounts for about 23 percent, followed by municipal consumption at 8 percent. (Hinrichsen & Tacio, 2001) In the coming years, population of world grows rapidly and the per capita consumption of water in coming years shrinks the world’s water resources, as a result the demand for water exceeds more than reserves to provide it. It is expected in future that a large number of countries facing water shortage due to exceeding demand of water. Water demand is also rises due to the growth of industrial usage, rising demand for household consumption and increasing use of water for irrigation to produce more food to feed rising population of world. Take United States of America as an example, while the average American in 1900 just consume 10 cubic meter of water per year for personal and household use, that figure had jumped by an average of 200 cubic meters a year. (Hinrichsen & Tacio, 2001) Most people in developing countries get their water from a public tap, community wells, rivers, lakes and rain water collected from ponds. As most of the developing countries become urban, people get their water from city water system. As we know that cities are ever growing larger and larger, their demand for water increases with the increase in population. Such growth of population puts pressure on city’s water reservoirs and most of them are unable to provide or fulfill that demand due to lack of resources. In Middle East, the amount of renewable water is declining due to increase in population. â€Å"The practice of heavily subsidizing water is costing Middle East governments dearly, both in terms of revenues and efficiency. Governments in the region, advised by water industry experts, are realizing that a fresh approach is required, one based on managing the region’s scarce water resources, rather than just reacting to uncontrollable consumer demand,† says Edmund O’Sullivan, Chairman of MEED Events. (Mideast faces fresh water crisis, By Staff Writer on Sunday, March 16, 2008) Due to shrinking water supply in Dubai, last month, the Dubai and Water Authority increased the tariff of water and electricity. This was the first time; Dubai has increased the tariff since 1998. â€Å"Tariff increases are bound to be met with resistance, so a gradual approach may be the best way forward. Although the change will not apply to UAE nationals, the biggest consumers of water, it is a step in the right direction. Managing existing water assets better could go some way to reducing the need for new capacity,† O’Sullivan said. (Mideast faces fresh water crisis, By Staff Writer on Sunday, March 16, 2008) Another major cause of shrinking water supply is water pollution; it becomes a major problem for all the countries of world, developed countries in Europe and North America face problems due to water pollution. In many countries of world, especially in developing countries, lakes, rivers and streams are used as receptacles for an assortment of industrial wastes, including untreated and partially treated municipal sewage, industrial poisons, and dangerous chemicals that mix into surface and ground water during agricultural activities. Caught between scare and polluted supply of water, and rising demand from population and industrial sector, most of developing countries are facing difficulties to provide demanded amount of fresh and clean water (Hinrichsen & Tacio, 2001). As the World Bank has warned, lack of water is likely to be the major factor limiting economic development in the decades to come (Serageldin, 1995). More than half of the world’s rivers are now so polluted that they pose serious health risks. One-third of Africa’s people already endure conditions of water scarcity, and water supplies are in jeopardy in China, India, Japan, Spain, southern France, Australia, the southwestern U. S. and many other parts of Asia and Europe. Rapidly growing populations, ever-increasing pollution, desertification and falling water tables endanger a fragile, finite resource. Toxic chemicals are contaminating water, endangering the world’s most precious supplies of water. Toxic brew of pesticides, nitrogen fertilizers, industrial chemicals, and heavy metals is fouling water everywhere, and that the damage is often worst in the very places where people most need water. In the next 50 years, an additional 3 billion people are expected to inhabit the Earth, creating even more demand for water for drinking, irrigation, and industry. But we’re polluting our cheapest and most easily accessible supply of water. (Sampat, 2000) Distribution of Freshwater: One major issue that is likely to have a major impact on freshwater’s supply and demand in the years to come is that of distribution. Like many other natural resources, freshwater’s distribution around the globe is extremely uneven. Areas inhabiting less than one third of the world’s population currently receive more than 75% of the annual rainfall. With global warming rapidly changing the environmental outlook of the globe, this natural distribution of freshwater is likely to become even more uneven. In some regions, where freshwater is available in abundance or annual rainfall is moderate enough to meet the demands of the local population, lack of proper resources and infrastructure restricts access to the freshwater supply. For instance, in South Asia, rainfall is the major source of freshwater. However, above 80 percent of the rainwater runs off too quickly to be effectively utilized. A number of methods and processes have been developed over the years to preserve freshwater resources and to ensure that runoff from the rainfall doesn’t go wasted. Dams and desalination are the two most commonly used processes world over. It should however be noted that not all countries suffering from shortage of water supply have enough resources to properly develop or employ such methods for the preservation of freshwater supply. Freshwater Resources: The Microeconomic Perspective: From a microeconomic perspective, the cost of freshwater is likely to increase sharply as soon as the planet starts running out of resources. Decline in quality of available freshwater resources such as river or lakes, change in rainfall trends and drying up of glaciers are some of the many factors that will eventually lead to a decline in the supply of freshwater in different parts of the world. Demand, on the other hand, will continue to increase as a result of an increase in population, lifestyle changes and improvement in quality of life in developing economies. The result will be a shift in the supply curve. In simple terms the price for freshwater will shoot up in the long run. There will be severe economic as well as sociopolitical consequences of such a shift in the supply curve. Economies suffering from freshwater shortages are already facing challenges that directly impact their economic performance and social progress. The only way out of this disaster is broad and extensive collaborative initiatives by the world nations to ensure the fresh water supply in the future. There should be immediate measures to be taken to sort out and cope with the problem of pollution of fresh water resources, because it is the most fatal blow on our already shrinking resources. Comprehensive awareness programs should be launched in every part of the world on local community bases so that the individuals become aware of the danger they are about to face in the near future and be prepared for it. Deliberate misuse of water should be considered a crime and extensive punitive measures should be taken in order to curb deliberate misuse and pollution of water supplies and resources. The overall condition of fresh water supply gives a clear indication that in the near future the fresh water supply will not only will be reduced but it will also become costly and the consequences will be very harsh and brutal for poor people who are already deprived off clean water supply may be completely left without water supply in the future. If immediate measures are not taken there is a very high probability that fresh water will become a luxury of the elite only and the commoners will have to survive without it if they can survive. References Hirichsen, Don & Tacio, Henrylito, (2001) The Coming Fresh Water Crisis is Already Here, Wilson Center, Retrieved on 17th March 2008 http://www. wilsoncenter. org/topics/pubs/popwawa2. pdf Middle East Faces Fresh Water Crisis, (2008) Emirates Business 24/7, Retrieved on 18th March 2008 http://www. business247. ae/cs/article_show_mainh1_story. aspx? HeadlineID=3929 Sampat Payal, (2000) The Hidden Freshwater Crisis, World Watch Institute Retrieved on 18th March 2008. http://www. worldwatch. org/node/1684 Water Politics, (2008) Wikipedia The Free Encyclopedia. Retrieved on 17th March 2008 http://en. wikipedia. org/wiki/Water_politics#Water_as_a_critical_resource Saijel Kishan and Madelene Pearson, Bloomberg News Published: Monday, July 03 2006 http://www. canada. com/edmontonjournal/news/business/story. html? id=60e8a4c1-b733-4f96-a85c-d723c1f4e221&k=50181 http://www. business24-7. ae/cs/article_show_mainh1_story. aspx? HeadlineID=3929

The changes in the global pattern of tourism

The global pattern of tourism has changed drastically over the last fifty years. Changes such as the number of global tourist arrivals, distances travelled, and the cost of travel have meant that ‘tourism' is today one of the world's most important industries. There are a number of reasons for this change, for example, technology and social situation. In the seventeenth century, doctors recommended benefits of water, which triggered the building of spas. People began taking relaxing trips to these spas. When the industrial revolution struck, huge changes in transport took place, such as better rail links in the United Kingdom. These railway lines provided links to expand. Also, people began to earn more money, and with disposable income, annual holidays became increasingly popular. During World War 2, people were not allowed on beaches. Once the war had finished, people celebrated by going to the beach. This made seaside resorts become much more popular. In 1970, the jet plane carried 307 million passengers. By 2006, this had increased to a huge 2. billion! This shows just how much tourism has increased in the past half century. In 1950, international tourist arrivals were only 20 million. In 2005, it was measured to be over 700 million! Europe in particular was responsible for a considerable amount of this increase, approximately 400 million. In 2005, there were 441,528 thousand international tourist arrivals. The Mediterranean was responsible for 36% of this number. This shows that southern Spain is a very popular tourist destination. I think this is due to the climate in the Med. The Mediterranean is well known for its hot, dry summers, which naturally attract visitors. Most arrivals here are on holiday for leisure purposes, rather than business. It is not just in Europe, however, that tourism has increased. In 1990, the world saw 439 million international tourist arrivals. In 2005, this has increased to 806 million. This shows an average annual increase of 3. 3%. There are many reasons for this increase. Economic factors, such as rising incomes, decreasing costs of the flight itself – due to the expansion of budget airlines. Also, many airlines have introduced reward schemes, or loyalty bonuses, which are appealing to the customer. Social factors, such as the increase of the number of days paid leave workers can take. This gives people more spare time for a holiday. Many students in recent years, after finishing school, which to take a ‘gap year' to go travelling, before going to university, or getting a job. Finally, there are also political reasons for which tourism has increased. Some governments invest heavily in advertising campaigns to encourage tourism. Also, international sporting events, such as the world cup or the Olympics, attract millions of people from all over the globe. Forecasts from the World Tourism Organisation are showing an approximate 650 million increase in global arrivals between 2007 and 2020. Another noticeable change is the distance people are travelling to go on holiday. In 1841, Thomas cook introduce the first ever package holiday, from Leicester to Loughborough, which was only 12 miles away. These travellers attended temperance meetings. Fifty years ago, tourist arrivals in the Middle East and Africa were virtually none existent, as the travel links simply were not there. I believe one of the main reasons that tourist arrivals have gone up so considerably is due to the travel links expanding. Thanks to the invention of the train, Thomas Cook was able to expand his holidays. However, in 1970, with the invention of the jet plane, mass tourism began. There was no limit to where people could go on holiday, so the distances travelled dramatically increased here. People travel to places such as Spain, specifically the Mediterranean, as it is only 725 miles, which is approximately a 2 hour flight. Today; people can travel literally across the world, from London to Sydney, a distance of 10,552 miles. The third main change in the pattern of tourism over the last fifty years is the cost of travel. People first began taking holidays after the industrial revolution, as they had disposable income. Although prices for travel such as trains were cheaper in the 1950's, people have a much higher income in today's society, so they are much more affordable. In the early 1990's, the first budget airline was introduced. They offered low cost flights in exchange for passenger services, such as in-flight meals and extra leg room. This appealed to many working class people, who wished to go on holiday for less. Flights on budget airlines can be extremely cheap, especially if you fly on an unpopular time and date. You can purchase some flights from the UK to Ireland as cheap as 1p plus VAT. Return flights to Spain can be as cheap as i20. Package holidays also made holidays more appealing to people who were not as well off as some. They combine the cost of flight, accommodation and travel, and are usually with a group of several other tourists. Package holidays range from your typical relaxing fortnight on the beach in Majorca, to cockroach races in Brisbane! At the story bridge hotel in Brisbane, every January 26th, they race cockroaches! This tradition began in 1981, when to drunken men argued that the cockroaches from their part of town were fastest. Today, people literally come from all over the world just to race there cockroaches! Also, many people today choose to go on â€Å"all inclusive† holidays. This is when the holiday resort provides all food and drink in the price. This is appealing to people as when on holiday, many people do not wish to cook or worrying about finding places to eat. All inclusive holidays start from just i290 to Ibiza; this makes luxury more affordable for the working class. Recently, ecotourism has become more popular. This is when people travel to less economically developed countries such as Kenya, or India. They volunteer once in the country, often doing conservation work. Flights to these areas are not very expensive, as they are less popular. Fifty years ago, few people travelled far to go on holiday, as it was so expensive. Overall, these are the three key changes in the pattern of tourism. A dramatic increase in the number of global tourist arrivals, an increase in the distance travelled, and cost of travel being more affordable, have meant that tourism is very different today than it was fifty years ago. I feel that the main catalyst for increasing tourism in general, was the invention of the jet plane. Carrying 2. 1 billion passengers in 2006, it is clearly responsible for a large part of transporting these tourists. Of course, another reason for the patterns in tourism is the fact that people are earning more money. Thanks to this disposable income, more people can afford to treat themselves to a holiday. I also feel there are now more incentives to go on holiday today, such as these â€Å"package†, or â€Å"all inclusive† holidays, as these save the consumer money. Fifty years ago, people used to travel 12 miles down the road to go on holiday, today they travel to the other side of the world. I feel this shows just how big these changes in the pattern of tourism are.

Research paper on Ethnomusicology Example | Topics and Well Written Essays - 2750 words

On Ethnomusicology - Research Paper Example The CD is one that fuses the Turkish pop scene into a sense of both cultural traditions and modern techniques to create a contemporary style to the rich culture of history. The instrumentation which is used to complete this style includes mandolin, large percussion sections, violins, guitar and a pop beat for the background sound (Putomayo Presents 2011). Musical Style The musical style of both CDs follows the traditional format of the origins of the groups while carrying influences by the rock and Western style of music. The style is then combined with specific sounds that are able to show the content attributed to each area. The attempt made by both artist groups working toward a fusion sound. For instance, in the song, La Difference, there is a fusion of the African and Western instruments. Electrical guitar is used throughout the piece, as well as a background of piano. There is also a pop-rock beat that is used as a secondary part of the rhythm to create stronger movement. The s ong also uses the phrase â€Å"Love is Serabande† in the chorus. This combines the culture of English, French and African cultures, all which are known in the region that Keita has recorded. All of the CD songs follow this same influence, similar to the group of The Middle East. The musical style of Turkish Groove shows the same contemporary influences. The violin serenades and background, mandolin which is used and the strong percussion line are all a part of the Turkish traditional music. This is the strongest part of the songs that are played. This is combined with the Turkish singing that is attributed to singing in the Turkish language. However, there is a back beat that is... The approaches that are now being taken with music combine the concept of fusion with a cultural context. The individual experiences, political and cultural approaches all make a difference in how artists are expressing their music. However, this is combined with a fusion of sounds that are influencing the globe and changing the approach many have to music. More important, there is the ability to have universal themes that artists are interested in, all which are displayed with the individual and political tensions that the artists are aware of and which creates the main similarities used in the music. When looking at the artists of Keita and Putomayo Presents, it can be seen that cultural influences drive forward the music. However, the themes of ending war, re-looking boundaries and of finding peace remain the same for both groups.

Mission statements in modern organizational environment Essay

Mission statements in modern organizational environment - Essay Example From this research it is clear that the continuous expansion of globalisation has led firms internationally to continuously change their strategies, aiming to develop a strategic advantage towards their rivals. The success of firms in the global market has been related to their mission statements, where the organizational values and aims are analysed. Mission statements are used for different purposes by organizations internationally; most commonly, mission statements are used as tools for presenting an organization’s values and directions. However, the role of mission statements in business success is not clear. Moreover, meeting the targets incorporated in the mission statement can be a challenging target for most organizations but not at the same level. The role of mission statements in determining organizational success is examined in this paper; reference is also made to the value of mission statements as elements of the organization. Emphasis is given on the involvement of mission statements in different organizational activities but also on the value of mission statements as tools for promoting business strategies. It is proved that mission statements can help organizations to improve their performance, mainly n the long term, but their ability to offer immediate benefits is highly doubted, taking into consideration the fact that market conditions have been significantly deteriorated increasing risks for firms operating in all industries. 2. Mission statements in modern organizational environment 2.1 The role and value of mission statements as described in the literature Mission statements are commonly used for highlighting an organization’s key values and targets (Lusthaus 2002). In other words, mission statements reveal each organization’s aims, as they are aligned with a series of ethical rules (Little and Marandi 2003). However, the form of mission statements is not standardized. In certain organizations, mission statements are s hort, not particularly descriptive, showing the general framework of organizational activities (Williams and Green 1997). In other cases, mission statements are used as tools for improving the image of the organization in the market and for enhancing the morale of stakeholders (Thompson and Martin 2010). This trend is clear in the literature published in the specific field. In order to understand the role and the significance of mission statements in modern organizations, it would be necessary to describe the context of these statements, as identified in businesses worldwide. Williams and Green (1997) support that the term ‘mission statements’ is often used instead of the term ‘vision statements’. At the next level, Williams and Green (1997) note that ‘a mission statement usually describes the broad direction of an organization’ (Williams and Green 1997, p.22). In this context, a mission statement is used for showing an organization’s ke y values and the nature of its activities (Williams and Green 1997, p.22). Moreover, Kinney and Raiborn (2008) explain that a mission statement is used in order to highlight the purpose of the organization and the ways in which the organization will respond to the needs of its customers. Kinney and Raiborn (2008) also note that organizations tend to use a mission statement along with a values statement in order to strengthen their position in the market. On the other hand, Henry (2008) claims that a mission statement is used just for explaining the reasons for the existence of the organization. Other issues could be possibly incorporated in an organization’s mission statement at the level that they are considered as necessary for improving the organization’s position in the market. According to Trevino and Nelson (2010) mission statements

Concepts of Self and Selfhood Essay Example | Topics and Well Written Essays - 1000 words

Concepts of Self and Selfhood - Essay Example Locke shared the same ideas with Marx, believing that humans give up certain freedoms to have protection through their government. As a result, the basic nature of human self is portrayed in the light of selfhood and individuality and human nature along with its grace and flaws and it is done in accordance to the spirituality and ethical and metaphysical beliefs of the cultural environment of his time. The empiricism point of view enumerated the physical, mental and the mind/body aspect as tabula rasa by John Locke. In accordance to him, the entire nature of human self is the constant nurture of sensory experiences where the individual gathers information right from birth. On the other hand, Plato incorporated the idea of anthropology and metaphysics in defining the amalgamation of the concept of physical, mental and the mind/body aspect of the human nature. He suggested that the human nature is the combination of genitals, belly, breast and the concept of intellectuality. He also st ated the basic human nature was always uncomfortable with this coexistence and death was the only way out of this coercion. John Lockes approach to this issue of selfhood or individualism is based on the contradiction of values of his time and ethical methods available in his era (1632 - 1704). He "was directed against the principles of Sir Robert Filmer, whose books, asserting the divine authority of kings and denying any right of resistance, were thought by Locke and his fellow Whigs to be too influential among the gentry to be left unchallenged by those who held that resistance to an arbitrary monarch might be justified." (Locke, viii) Thus, it is certain that John Locke believed in the human self of man and that man should be paid his dues whereby there should be equalities in terms of ethics in the society. John Locke's approach to metaphysic and ethics is in this way very modern in nature and reading his text Second Treatise of Government yields a romantic approach towards different ethical consequences. This is because he was more of a political philosopher than an economist. Thus, a philosophical justification comes forward with his view of forceful equality of selfhood and individuality. An ardent empiricist by nature John Locke is always in favor of revolution. He conveys every opportunity to practice this approach, he feels that selfhood, and individuality is possible only by revolution. In a way, John Locke is at par with Marx but his approach is more fiscal oriented and data base where as Locke's outlook is more assumption based and romance is added to it enthusiastically. His views were based on the faith that human nature is the best judge of identifying right and wrong, that it is obvious that the population would determine correctly, what is ultimately right would eradicate differences in the process, and selfhood and individuality would prevail. (Lamb, 226-8) As such, in Marx's opinion, the alienation/duplication between the secular and religious worlds needs to be followed by a subsequent recognition of the alienation/duplication of the secular world itself for evoking the proper aspects of selfhood and individualism. The religious world is a projection of the secular world but the secular world

Strategic Management Of Ferrari Essay Example | Topics and Well Written Essays - 3000 words

Strategic Management Of Ferrari - Essay Example Ferrari iÃ'• known and iÃ'• highly valued everywhere in the world. From the UÐ… to Japan, from Germany and Ð…witzerland to India, to France, AuÃ'•tralia, New Zealand, RuÃ'•Ã'•ia, Brazil, and Argentina. The term ConÃ'•tructor applieÃ'• in F1 for a corporate or any well-organized body which conÃ'•tructÃ'• the car, engine or chaÃ'•Ã'•iÃ'•. The conÃ'•tructor of an engine or chaÃ'•Ã'•iÃ'• ownÃ'• the intellectual rightÃ'• to it. (Porter, 1985, 44) The title of Formula 1 World Champion ConÃ'•tructor iÃ'• given to the car that haÃ'• drawn the moÃ'•t pointÃ'• during the courÃ'•e of the Ã'•eaÃ'•on. A carÃ'• engine and chaÃ'•Ã'•iÃ'•, both are taken into account while deciding on itÃ'• pointÃ'•. If a carÃ'• chaÃ'•Ã'•iÃ'• and engine conÃ'•tructor iÃ'• the Ã'•ame, the title Ã'•imply goeÃ'• to that conÃ'•tructor. But, if the makerÃ'• of the chaÃ'•Ã'•iÃ'• and engine are different, the title iÃ'• given jointly, like Ferrari-Honda, Renault-MercedeÃ'• etc. The name of the chaÃ'•Ã'•iÃ'• conÃ'•tructor comeÃ'• before that of the engine conÃ'•tructor. The termÃ'• conÃ'•tructor and entrant have different and Ã'•pecific meaningÃ'•. An entrant iÃ'• the perÃ'•on or corporate entity that regiÃ'•terÃ'• a car and driver for a race Ã'•eaÃ'•on. Thereafter the reÃ'•ponÃ'•ibility of preparing and maintaining that car during the race weekend lieÃ'• with them. The term team iÃ'• uÃ'•ually applied to an entrant organization. The 1970Ã'• were the laÃ'•t decade Ferrari entered aÃ'• a workÃ'• effort in Ã'•portÃ'• car racing. After an uninÃ'•pired performance in the 1973 F1 World ChampionÃ'•hip, Enzo Ferrari Ã'•topped all development of Ã'•portÃ'• carÃ'• in prototype and GT racing at the end of the year, although, Enzo planned to pull out of F1, that year which waÃ'• the year of the laÃ'•t "official" Targa Florio road race Enzo regarded aÃ'• more important to him.

Anatomy, Physiology & Disease Assignment Example | Topics and Well Written Essays - 250 words

Anatomy, Physiology & Disease - Assignment Example A good example of communicable disease that poses a huge threat to public health include HIV/AIDS. This disease is easy to diagnose; the most common diagnosis is through blood tests. In essence, testing is done in order to identify the presence of antibodies created in the body in an effort to fight the HIV (Holland, Olsen and Florey, 2007). It is worth noting that the disease is caused by a virus known as Human immunodeficiency virus (HIV). Some of the signs and symptoms of HIV/AIDS according to Hall, Hall and Cockerell (2011) include weight loss, diarrhea, coughing, dermatitis, herpes, TB, unrelenting wounds, and abscesses. Prevention of HIV/AIDS depends on the mode of transmission. It can be transmitted through sexual intercourse, blood transfusion, and transmission from a pregnant mother to the unborn child. Prevention of the disease in relation to sexual transmission is achieved through the use of condoms and sex education. Blood ought to be screened thoroughly before transfusion to detect the presence of the disease. Pregnant mothers also ought to be tested and subsequent treatment given in case of presence of the disease (Ramaiah, 2008). Antiretroviral drugs are used to treat the disease. These drugs are taken on a daily basis in a bid to minimize the amount of the HIV virus in the body (Ramaiah, 2008). There are also post-exposure prophylaxis medications that are used for emergency treatments when an individual has been exposed to the virus (Hall, Hall and Cockerell, 2011). There is however no known cure for the disease. These medication are only used to reduce the amount of HIV in the body in order to allow the body fight infections. Epidemiological studies have proved that HIV is transmitted through three routes namely sexual transmission, exposure to contaminated blood, and mother to child transmission. The

All about Jupiter Essay Example | Topics and Well Written Essays - 1250 words

All about Jupiter - Essay Example The most accepted theory is that ice and other solid material combined to form its core. The core increased in size as it attracted other material from other sections of the Solar System resulting in an increased gravitational pull. â€Å"Eventually the core’s gravitational pull became strong enough to capture hydrogen and helium, which were abundant in the solar nebula.† (â€Å"Jupiter†, p. 200) That is why Jupiter consists primarily of hydrogen and helium. Jupiter rotates very quickly for a planet of its size, with a period of ten hours; it revolves around the sun once every eleven years. Like the other planets Jupiter orbits around the sun in an elliptical orbit. (â€Å"Jupiter†) It is approximately 480 million miles from the sun. (Simon) Jupiter is often seen high in the sky, and some its surface features such as its satellites can be seen with a telescope. â€Å"From our planet Jupiter looks like a bright star in the night sky.† (Simon, Introdu ction) It is one of the most luminous objects in the sky next to the Sun, the moon and Venus. Jupiter is considered one of the â€Å"gas planets† because its atmosphere is composed primarily of gas. It is two and a half times the mass of all the other planets in the Solar System combined. Jupiter is one of the Jovian (outer) planets; the other Jovian planets are Saturn Uranus and Neptune. There is no solid surface on Jupiter. Jupiter is composed primarily of hydrogen and helium. It is similar in composition to the Sun. In 2008, scientists were able to define the surface of Jupiter. â€Å"The surface of the planet is defined as the point where the pressure of the atmosphere is 1 bar, which is equal to the atmospheric pressure at Earth’s surface.† (Coffey, â€Å"Surface† n.pag) The pressure and temperature increase deep in its atmosphere, resulting in hydrogen being compressed into a liquid. Partially beneath its surface, the hydrogen hardens and becomes ca pable of conducting electricity. In this metallic layer, electrical currents resulting from the rapid rotation of Jupiter produces its immense magnetic field. In the middle of the planet its enormous pressure may support a solid core of rock that is approximately the size of Earth. Jupiter's upper atmosphere consists largely of hydrogen and a lesser percentage of helium. The interior of the planet is approximately 71% hydrogen, 24% helium and contains minimal amounts of other elements. The atmosphere also includes hints of methane, water vapor, ammonia, and silicon-based compounds. There are also traces of carbon, ethane, hydrogen sulfide, neon, oxygen, phosphate, and sulfur. The outermost layer of the atmosphere contains crystals of frozen ammonia. (â€Å"Jupiter† Wikipedia) The temperature on the surface is about -235 degrees F (-150 C). The temperature on Jupiter increases to about 70 degrees Fahrenheit deeper within its atmosphere. The winds continue to blow at approximat ely 450mph. (Holladay). The atmosphere in Jupiter increases in thickness until it reaches the ocean. The magnetic field in Jupiter is tremendous. Jupiter has the strongest magnetic field of all the planets. Millions of charged particles are confined to Jupiter’s magnetosphere: â€Å"the area in which magnetic field lines encircle the planet from pole to pole.† (â€Å"Jovian Giant†, para.3) Its rings and moons are entrenched in a radiation belt

WGST 400 Assignment 4 Research Paper Example | Topics and Well Written Essays - 5000 words

WGST 400 Assignment 4 - Research Paper Example of both self-emancipation and social emancipation.1 In England, the term was first employed in the1890s during women’s campaign for individual rights and the claim to citizenship, especially the right to vote. The campaign for suffrage challenged the denial of autonomy to women as citizens and feminists of the period stood for women’s right to ‘a democratic political voice and a social right to resources.’2 However, the meanings of feminism in England extended beyond the campaign for suffrage and encompass such aspects as the segregation and stigmatization of women’s gender roles, celebration of women’s uniqueness and differences, socio-economic and cultural issues of women, equal rights for women, education disparities of women, equality of opportunities and equal wages, antimilitarism and pacific movements, women emancipation movements, and so on. It is worthwhile to analyze the historical growth and development of feminist movements in Great Britain. Organized feminist movements in England can broadly be categorised into two phases-the first wave feminism and the second wave feminism. The first wave feminism consists of feminist movements in the nineteenth and early twentieth centuries, covering the campaign for suffrage as well as feminist experiences during and after the First and Second World Wars. The second-wave feminism covers feminist initiatives beginning from the mid-or late 1960s and extends itself to modern radical feminism. The nineteenth-century intellectual and economic developments, specifically liberalism and the industrial revolution, paved the way for the first wave feminism.3 While liberalism triggered the growth of liberal feminism the industrial revolution offered middle class women a unique opportunity to work out of home and earn money. Similarly, the theory of relative status deprivation has been part ly responsible for the rise of feminism as women strongly felt that they are negated of adequate opportunities whereas their

MARKETING ENVIRONMENT Essay Example | Topics and Well Written Essays - 4000 words

MARKETING ENVIRONMENT - Essay Example The political environment gives the political conditions, the government restrictions, relations between two countries etc which help or hamper the growth of the industry (Dev, 2005). The economic environment refers of the economy of the country and how supportive the economic conditions are for the growth of the industry. The social environment is actually the consumers’ demographics, their tastes, preferences, religion and preferences etc. which influence the industry. The technological advancements also play a major role in the industry’s growth factor. According to Kotler, (2003, p.690), then there are the legal factors which comprise of the laws and legal matters around the industry and lastly the ecological factors which relate to the environment and how it is affected by the industry. The SWOT analysis gives the threats and opportunities coming from the external environment and the strengths and weaknesses that exist in the internal environment of the firm/industry (Cooper, R 1986). Once this analysis has been conducted, the problem areas can be identified easily and these problems may be overcome using the strengths and opportunities and thus strategies are devised using the TOWS matrix. It is better to use a mixture of analysis than using just one model (Kotler, 2003, p.695). There has been a rapid advancement in technology and businesses have grown because of it. The internet is now easily available and thus trends have been changing where shopping is concerned. With the internet shoppers can easily shop online from the convenience of their homes and offices and do not have to go out for shopping (Plunkett Research, 2007). With the help of such technology, more consumers can be reached and the shopping can be conducted globally and in every part of the world. Also, with the advancement of technology, processes have become faster and consumer profiles can be maintained which enables targeted and focused marketing

Intellectual property Essay Example | Topics and Well Written Essays - 500 words

Intellectual property - Essay Example Erik Sherman in his article in The Chief Executive states that securing intellectual property is the only way to stay on the rapidly developing marketplace these days. The companies that do not have time or money for licensing their inventions end up bankrupts very soon nowadays, as the ideas that are not patented or copyrighted are soon plagiarized by the competitors, who spare neither trouble nor expense to get the legal rights on the invention. Thus, in some time, the company may even be sued for using its own invention. In addition, selling the rights to use the intellectual property may become a very good source of profit, especially for the small companies. The Ambient Devices, a company, producing consumer electronics can be brought as an example here, as today it gets 15% of its income just from granting other companies the rights to use its intellectual property, and the managers hope that in the next year this number may grow to the 50%. Andrea. L. Foster, the author of Who Should Own Science emphasizes the importance of sharing the scientific and technology data in order to make the research process more effective. Unfortunately, he forgets about thousands of companies who build their business and research strategies grounding on the existing system of licensing the intellectual property.

Market Risks Essay Example | Topics and Well Written Essays - 500 words

Market Risks - Essay Example For example, investors lose billions of dollars of their money when Pakistan stock market crashed in 2005. (KSE.com.pk/2005) This list of risk in not exhaustive, but there are also thousands of other risks when investing in an emerging market. Another major risk is differences in culture and religion of the host country and the company. In 2006/7, there was an issue of blasphemous cartoons being published in Norwegian newspapers. This angered the Muslims all over the world. Telenor, one company which is from Norway and operating in Muslim countries like Bangladesh and Pakistan suffered as a result. Many people stopped using their service and many governments threatened or fined the company. To make the matters worse people also protested and damaged their branches. As a result, the company suffered huge losses and at one time it looked like that whole of their investment is going to go wasted. (Grameen Phone, 2005) Similarly, disparity of income in many countries has made matter worse for these businesses. For example, Subway initially entered as luxury brand in Pakistan. But because people in Pakistan are generally poor, they were not able to afford this expensive food and hence the business suffered huge losses until they bring their prices down which implied reduction in profits for SubWay.

The Cuban Missile Crisis Research Paper Example | Topics and Well Written Essays - 2250 words

The Cuban Missile Crisis - Research Paper Example 253) By January, the decision seemed to have been made to remove Castro (Freedman 2002). In the spring and summer of 1960, Richard Bissell, the Deputy Director (of Plans) of the CIA, planned various assassination schemes for Castro, and started training a group of anti ­ Castro fighters. In the beginning, the plan was to send in small groups of guerrillas that were being trained in Guatemala, which could infiltrate the island nation and start uprisings and eventually a counter-revolution. Bissell and the CIA had used similar covert operations (though on a smaller scale) to overthrow governments successfully in Guatemala and Iran, and not so successfully in Indonesia (Freedman 2002; Blum, 1986). However, by the Fall the plan had evolved from inserting small bands of guerillas to a conventional amphibious invasion, and by November the group swelled to a l500-man paramilitary force of anti ­Castro Cubans that even had their own "air force" of B-26 bombers (Andrew 1995; Blum, 1986). Given the sheer size of this force, it did not remain covert for long. By 10 January 1961, The New York Times ran a full story on the training camp with a detailed map (Andrew 1995; Blum, 1986). Moreover, in his last State of the Union address, Eisenhower warned Castro that, "Although, unhappily, Communist penetration of Cuba is real and poses a serious threat, Communist dominated regimes have been deposed in Guatemala and Iran." (Andrew 1995: p. 255). This overt and covert pressure against Cuba continued under the Kennedy administration. The earlier plans to assassinate Castro, including subcontracting with the Mafia, continued in the spring of 1961 (Andrew, 1995; Blum, 1986). In April, Kennedy authorized Operation ZAPATA, which became the Bay of Pigs fiasco. After the failed invasion, the debate within the administration was between the overthrow or the containment of Castro (Freedman, 2002). The difficulty was that though the administration agreed that Castro should go, Kennedy w as not interested in a direct American invasion. Instead President Kennedy, with the enthusiastic urging of his brother Robert Kennedy, decided upon a mixed policy of economic warfare and covert operations. The combination of these, it was thought, would produce some sort of anti-Castro uprising (Freedman, 2002). On the covert action side of the policy, in June 1961, Kennedy set up the Special Group (5412) - consisting of John McCone (the new Director of Central Intelligence, or DCI), the chairman of the Joint Chiefs of Staff (the JCS), and the undersecretaries of the State and Defense Departments, to plan more covert action against Castro. Robert Kennedy, the Attorney General, became a supporter and advocate of covert action to eliminate Castro during his time overseeing the reorganization ofthe CIA after the Bay of Pigs. As Robert Kennedy wrote, "My idea is to stir things up on island with espionage, sabotage, general disorder, run [and] operated by Cubans themselves with every gr oup but Batistas [and] Cornmunists" (Freedman, 2002: p. 158). American covert action against Castro's regime continued and intensified in the spring of 1962 under the code name Operation MONGOOSE (The Cuban Missile Crisis, 1962).

International Business Strategy Essay Example | Topics and Well Written Essays - 2500 words

International Business Strategy - Essay Example Under the stages approach, learning occurs first within the domestic market and then the business seeks opportunities in culturally-similar markets before ultimately expanding into a foreign market and developing the appropriate market entry strategy for this new foreign environment. Virgin Group, founded by Richard Branson, is an excellent example of a conglomerate that has utilised incremental foreign market entry strategies. The Virgin group first gained market experience in the United Kingdom, then selected entry into the United States, a location with similar culture to find market success utilising knowledge gleaned through UK business practices. Today, Virgin Group has built considerable marketing prowess and human capital advantages that allow the company to align strategy with foreign market characteristics. Common practices and metric within a variety of subsidiaries was gained through knowledge management and knowledge transfer that could, in the long-run, be applied to new and innovative business practices aligned with foreign culture and market characteristics. The Uppsala model is a rather common sense business model that strongly reinforces the necessity for knowledge management. Learning occurs through social, technological, organisational and marketing-based conceptions that build competencies, performance, and determine the appropriate market entry strategy required to meet foreign market demands in the pursuit of becoming a global corporation. Wal-Mart is a relevant example lending support to the Uppsala model, as this business determines a variety of unique market entry strategies, including joint ventures and acquisitions, in order to build knowledge about foreign culture preferences before ultimately determining an appropriate strategic policy aligned with foreign market characteristics. For instance, in Canada, consumers are â€Å"socially

Assignment 4 Example | Topics and Well Written Essays - 250 words - 6

4 - Assignment Example It allows the viewer to visualize the world with time consciousness and realization. Baroque style represents have dramatic and emotional values. The arts depict difference in time at particular periods of artistry. Besides, the arts have emotional meaning and dramatic nature. Impressionism art influences viewers’ attitude towards images and the environment. The art convinces viewers to see landscape or the world a beautiful and supportive surrounding. As viewers’ imagines being in the same world as depicted by the art, their thinking and manner of visualizing the world substantial changes. Consequently, they become part of the painting. Moreover, impressionism instils sense of reality into the viewers’ minds. Romanticism enables the viewer to visualize partners in emotional and affectionate manner. It presents the viewers with an opportunity to understand romantic issues and develop an appropriate mind to deal with anticipated complications. Romanticism style reflects modern values bestowed in love affairs including emotions and marriage